You might wonder DIY Loundry Soap Bar. Here is the explanation.
DIY Loundry Soap Bar
A Bar of handmade laundry soap
DIY Loundry Soap Bar – Because I want my laundry soap to turn out as a solid bar, I’ve settled on using coconut oil as the fat in the recipe. Sodium hydroxide (or lye) changes the texture of coconut oil, which on its own is highly moisturizing, into something that is much drier.
DIY Loundry Soap Bar – This 100% coconut oil soap bar is not recommended for use on the body, but it does very well as a laundry bar, a stain remover, or a cleaning bar. The combination of lye and coconut oil creates a powerful cleaning agent.
an organic, handmade, cold-processed soap made with coconut oil
This bar of soap is made with nothing more exotic than coconut oil, water, and lye. Distilled water must be used when dealing with lye since tap water contains minerals that might react with the lye.
The best coconut oil to use for soap production is unrefined, pure coconut oil that has no additives. The high melting point of coconut oil makes it a great fat for making soap.
Items needed to make a laundry bar
DIY Loundry Soap Bar – Some of the links in this post are affiliate links, which means that if you click on one of the links and make a purchase, I may get a small compensation at no extra cost to you. When people buy anything through my Amazon affiliate link, I earn a small percentage of the sale. To read my full disclaimer, CLICK HERE.
Soapmaking molds Blender that you put in the sink Indicator scales
Glass or another heat-safe bowl Gloves
Use full-facial protection goggles to avoid injury to your eyes. This is the best bar soap recipe ever.
I used a soap calculator to get such accurate results. If you make any changes to the recipe, no matter how minor, you will need to get fresh measurements.
Use lye only in a well-ventilated area, and wear protective gear such goggles and rubber gloves at all times. Any contact with the eyes or skin should be avoided, since lye can cause serious harm to the human body.
Ingredients
Oil extracted from a mature coconut, 16 ounces
Lye: 2.71 ounces; water: 6.05 ounces Add 10-15 drops of fragrant oils (optional)
This recipe produces 6 bars of soap.
instructions
DIY Loundry Soap Bar – Pour the water into a heat-resistant glass or thick plastic pitcher after weighing it on a digital scale to determine the correct amount.
To make lye water, measure out the lye and then pour it into a large bowl filled with water. The lye must be dissolved in the water, therefore careful stirring is required. Keep in mind that the temperature will rise fast due to the chemical reaction.
To get the right amount of coconut oil, weigh it on the digital scale. Put it in a saucepan and melt it over low to medium heat.
DIY Loundry Soap Bar – The coconut oil should be removed from the heat and left aside after it has melted.
It is time to mix the lye water into the oil when the temperature inside the oil drops to about 100 degrees Fahrenheit. If using an immersion blender, the lye and water should be added to the oil gradually. The time commitment here shouldn’t be more than a few minutes. The consistency is just right when drops of soap from the blender pool on top of the soap in the saucepan. The trace is the common name for this phenomenon.
This is the moment to add essential oils, if you plan on doing so. Incorporate the ingredients using an immersion blender.
To make a bar of soap, just pour the mixture into a soap form. Nothing unusual has to be done to silicone soap molds before the soap is put in. The use of parchment paper may be required for different types of molds.
Soap requires at least 24 hours and up to 3 days to properly harden in the molds before removing from the molds.
Soap bars should be allowed to cure for three to four weeks after being removed from molds.
Related to DIY Loundry Soap Bar – how to make bar soap
Leave a Reply